Cheap soundproofing using American Sound Isolation tape.

American Sound Isolation tape is a great way to give you new home or addition some good soundproofing without spending a fortune. This sound isolation tape comes in 100 lineal ft rolls and it 1 7/16 " wide or basically the width of a stud or joist end. You simply peel off the backing and adhere to the Isolation tape to the face of all of the studs or the joist prior to screwing in the sheetrock. This will isolate the stud or joist structure from the finished drywall. This isolation helps to reduce airborne sound transmission as well as structure borne transmission through the studs or joists. There is another method that employs the American sound isolation tape and that is to double layer it on every other stud. If your studs are 16 OC then you will be taping every other stud at 32" OC. Once you have double taped every other stud, you will screw your drywall only into the taped studs. This will not only give you the isolation of the wood or steel structure from the outer wallboard, but it will give you the same effect as staggered studs. This method can be employed on both sides of the studs and to the end facings of joists. You can even tape the joists above before installing a sub floor, which will help to isolate the sub floor from the joists and the ceiling below. If you are in the process of new construction or remodeling where you have removed all drywall, taping the studs and joists with the American Isolation tape is essential. If you are remodeling or under new construction, American Sound Isolation tape is an effective and economical way to give your drywall the isolation it needs from the wood structure. This isolation will help to give you some good soundproofing between bedroom walls for example and doesn't cost you an arm and a leg to install. There are many other uses for American Sound Isolation tape that I just couldn't fit into this article. Builders and contractors across the United States and Canada are now using American sound isolation tape as a low cost soundproofing alternative to the more costly foams and barriers. For more information on American sound isolation tape or other quality soundproofing products go to my blog at: http://massloadedvinyl.blogspot.com/ Thanks for reading and learning about American Sound Isolation tape. This is Dr. Bob...Out!!!

Dr. Bob is the Senior Technical Advisor at Soundproofing America Inc, the leading authority in Soundproofing and Acoustical treatment technology.

Dr. Bob O. Soundproofing America, Inc. Senior Technical Director Soundproofing Expert to The New York Times, The San Francisco Herald Examiner, The San Diego Union Tribune, and the Charlotte Observer Ph (877) 530-0139 Toll free Fax (347) 721-9079 E-mail: Dr.bob@soundproofingamerica.

Green Glue instead of insulation for soundproofing

Old School soundproofing still believes that batt insulation is a good soundproofing agent. There are some good sound batt insulations out there such as Roxul AFB and Bonded logic's bonded cotton insulation and they work well for both soundproofing and thermal protection, however no batt insulation is strong enough to stand alone as the sole soundproofing material in a wall ceiling or floor assembly.

If you can afford a good batt insulation I always encourage it, but if you are soundproofing as ceiling and are not really concerned about the thermal aspects of the ceiling then I feel adding drywall pieces cut to fit perfectly into the joist cavities and screwed to the sub floor above would be much more effective than any batt insulation. Now to super charge this application I recommend that before you screw the pieces of drywall to the sub floor you apply Green Glue sound dampening compound to the back of the drywall pieces prior to screwing them to the bottom of the sub floor.

Green Glue is a visco elastic damping compound that is taking the soundproofing industry by storm. It comes in caulk tubes and is applied using a large quart size caulk gun. Basically you would cut the pieces of drywall to fit snuggly between the joist cavities. You would the liberally apply the Green Glue to the backside of the cut drywall and then screw it to the bottom of the sub floor. The Green Glue will be sandwiched between the drywall and the bottom of the sub floor. The tighter you screw the drywall down, the better the soundproofing will be. In essence, the pieces of drywall sporting the Green Glue in their backsides with become a most effective sound dampening system that will dampen the impact noise from above long before it is able to be transmitted into the joists and ultimately into the ceiling below. Now, is more better in this case? Absolutely, if you are able to double or triple the Green Glued layer of drywall you will indeed increase the dampening ability of the drywall and the sub floor and add greatly to the soundproofing endeavor.

Once you have installed your layers of Green Glued drywall pieces into the joist cavities, now would be a good time to install your sound or thermal batt insulation. Now for our finished drywall ceiling, I recommend that we spend the money for 2 layers of 5/8" drywall. You will screw in your first layer of drywall directly to the ceiling joists. Now your second layer will be installed directly over top of the first layer however, you guessed it, I recommend that you apply 3 tubes of Green Glue to each 4' X 8' sheet of drywall that you put up. Once you have finished with the double drywall using the Green Glue, you should immediately detect a lack of annoying noise coming from the people above. You have soundproofed your ceiling and your neighbors don't even have a clue that there was a problem there. How awesome is that? Read more about Green Glue and soundproofing walls, ceilings and floors in subsequent articles, for now this is Dr. Bob....Out!!!

To learn more about Soundproofing and soundproofing materials visit our site http://www.soundproofingamerica.com/

To order Mass Loaded Vinyl see our site.

You can read more articles on soundproofing on our blog

Old School soundproofing still believes that batt insulation is a good soundproofing agent. There are some good sound batt insulations out there such as Roxul AFB and Bonded logic's bonded cotton insulation and they work well for both soundproofing and thermal protection, however no batt insulation is strong enough to stand alone as the sole soundproofing material in a wall ceiling or floor assembly

Building Waterproofing - Keep Your Structure And Investment Safe From Water Damage

The concept of waterproofing or protecting buildings against the damaging action of water derives from the need to avoid water and humidity related elements that act negatively upon constructions. This negative effect can present itself in several ways, creating health problems, structure deterioration, facility damage and others. Not to mention, that repairing a building damaged by water can be very expensive!

Permeability most frequent causes are: porous or flawed material, badly sealed splices, crack existence, building defects and inadequate surface pendant.

However, we can find different kinds of humidity: the one that gets in from the outside (because of rain, different kind of water infiltrations, ground humidity or underground water), building's own humidity (permanent or because of the construction) and the one produced gradually by the building (because of its service as well as due to condensation and water leaks).

Basic conditions for waterproofing involve the surface's fitness for treatment and its cleanness. Building waterproofing can be done in a surface with/without the presence of water and with/without previous treatment.

Building Waterproofing Systems

Based on water's origin and effects on buildings and concrete, waterproofing systems have been classified:

- Surface waterproofing: done with coating plates, bituminous emulsions, vinyl pastes, resins and sealants.

- Integral waterproofing: integrated to the mass of concrete, affecting its permeability.

- Hydrophanous waterproofing: integrated to the mixing water or used as curing systems, allow the improvement of concrete's characteristics such as workability, compression resistance, decrease of reinforcement steel corrosion, decrease of fissures and cracks, and extended durability.

Kinds of Waterproofing

- Rigid waterproofing is meant to seal filtrations, make waterproof concrete structures or waterproof coatings. Treatments for rigid waterproofing generally are: concrete and cement integral additives, and cement, epoxic, plastic, or metallic coatings.

- Flexible Waterproofing is intended for structures affected by temperature changes and water settlements. This kind of waterproofing is a protection capable of absorbing movements without suffering damages that could allow water access. Flexible treatments are membranes, hot asphalts, cold asphalts (based in water or solvent), polymer emulsions, vinyl emulsions, and acrylic emulsions.

To fit your particular needs, you will probably need to use one or a combination of the above kinds and systems of building waterproofing. The best way to go is to ask an expert in your area to help you find the best solution for your building.

Something is for sure, if you take good care of waterproofing your building you will keep your structure and investment safe from water!

The information for this article was kindly provided by Sika Mexicana, company part of Sika Group, world renowned manufacturer of specialty chemicals for construction and industry. For more information visit http://www.sika.com.mx

Leftover 4th Of July Fireworks Are Great For Bomb Proofing The Horses

The Goal

I was working with Vego and Gemini today. I have been working on desensitizing them to loud noises. The final goal is 1) to be able to shoot a gun while sitting on their backs and 2) to be able to ride them down a street filled with people, flying streamers, loud noises, fireworks, etc. Basically, I am trying to bomb proof my horses.

Look What I Found

4th of July had just passed and I still had fireworks. When I was younger I would have never had any firework left over. That would be a sin. I guess I have slowed down a bit and it is not so important to light every firework off or see how many I could light at a time before I had to run away from the eruption of flames, sparks and explosions I had initiated at ground zero. Because of my new found self control, we had some Black Cats left over. These are the little fireworks that just explode and make a big bang. I had 2 packs left with 100 firecrackers in each. So, what should I do with these firecrackers? I could save them till next year. No way! I recalled reading many forum entries were people had posted topics about the 4th of July and how the fireworks scared their horses. I would reply and tell them that they should desensitize their horse to these noises. So, that is just what I decided to do with my horses.

4th of July All Over Again for Vego and Gemini

I decided to start my lesson with Vego. Gemini was in a holding stall next to the arena where I was working with Vego so she could hear and see everything going on. I had a rope halter and lead rope on Vego. I then started to walk Vego around the outside of the arena. While doing this my 11 year old son was in the center of the arena. He started to light the firecrackers one by one. Bang! The horse was a little bit startled but we just kept walking. Again the firecracker went off and Vego jumped but we just kept walking. My son continued to light firecrackers one by one and I continued to walk around the arena circling in closer to the center. When we eventually circled to the center of the arena we stopped. One by one my son threw firecrackers all around the horse. He did not throw them so close that it could hurt the horse but rather out in front of the horse or behind the horse 6-10 feet away on either side. Near the end of the lesson, in the center of the arena, Vego was not bothered by the firecrackers. He would not even flinch as they exploded.

I repeated the same procedure with Gemini. She did equally as well. As a grand finally we lit off a string of about 20 Black Cats while walking the horses around the arena. They had no problem with noise and continued to walk at a relaxed pace.

Conclusion

This was not the first desensitizing exercise that I had done these horses. The results I had during the firecracker session went very smooth because I have at least one desensitizing exercises every time we have a training session.Todd Mera is a Biochemist that has always had a love for horses. Todd started training horses in his 30s. He has worked with and trained many horse starting from birth and older problem horses. http://www.EverythingEquus.com

Metal Roofing 101

Today I received a phone call from a nationally published and recognized remodeling magazine in regards to their future article on metal roofing. It turns out that one of their editors tasked with writing an article about metal roofing decided to consult with me after looking at one of the metal roof guides on my metal roofing resource and information library.

Our conversation involve many different aspects of metal roofing and it was what prompted me to publish this metal roofing article, which will hopefully answer a lot of questions that you may have. I believe you will find this guide especially useful if you are considering a re roofing job.

First of all let's address some of the things that you probably already heard about before:

Metal Roofing costs significantly more than regular roofing. Answer to this question is both yes and no.

It turns out that although, initially you will probably pay higher amount for metal roofing than you would with regular roofing material, in the long run metal roofing will pay for itself making a it a no nonsense investment for somebody who is looking for longevity of their roof, its durability, great looks, and energy savings.

What happens is that the higher price you pay for metal roofing initially gets off set by the increased value of the house, or building where metal roofing is installed. In addition to the increased value of your home you will also gain the following benefits:

Long lasting Roof Hopefully you did your homework when selecting a metal roofing contractor, and you chose the knowledgeable and skillful metal roof installers performing the installation of your metal roof. Modern residential metal roofs come with up to 50 years material and labor warranty. Thus you can set it and forget it, figuratively speaking! Thin about how much money you will be saving considering that the average asphalt roof lasts only 17 years.

Beautiful Metal Roof We all love our homes, and with metal roofing our house can attain very desirable and sophisticated looks that could be the envy of the neighborhood! A great variety of metal roofing styles and choices will ensure that every homeowner can find something that they want in residential metal roofing.

Energy Savings Did you know that meta roof can greatly decrease your air conditioning bill during the hot months of summer? One of the significant benefits of metal roofing is that metal has sun reflectivity properties, which allow it to reflect the heat radiation away from your roof keeping your house cool and your energy bill low. That is just one of the ways that metal roof will pay for itself. After all, our monthly air conditioning costs can add up to a big chunk of money during the summer time.

Metal roof Government Tax credit Even the U.S government will provide you with a tax credit incentives if you install the approved select energy star rated metal roof.

Now information above is just common knowledge in regards to metal roofing. Hopefully it has cleared up and answered some of the general questions that you may have had.

Now going back to my todays conversation, I would like to talk about more in depths metal roofing concepts.

Many homeowners have heard about metal roofing before, but have very little idea as to what are the choices and options available to them.

So, I thought it would be a good idea to list three main metal roofing materials used in the industry, as well as touch up on the available metal roofing choices and styles.

Residential Metal Roofing Materials:

Steel: This is the most frequently used metal roofing material today. Steel offers a great degree of durability in metal roofing. It is usually protected by a layer of zinc and aluminum alloy, which protects it from rust and corrosion. Most commonly used steel shingles would be galvanized steel such as G-90, which is sprayed over with Kynar 500, or Hylar 5000.

This type of galvanized steel offers a great degree of protection from corrosion and is known to last over 30 years, in fact Tamko galvanized steel shingles, slates, and tiles come with 50 years material warranty, which shows a great confidence this manufacturer has in their product.

Galvalume steel is another common type of steel metal roofing, it is commonly used in standing seam metal roofing panels that go over many commercial and residential roofs.

Steel has deserved its good reputation as a metal roofing material of choice because of its excellent corrosion resistance and relative affordability.

Aluminum is another popular metal roofing material, which is corrosion resistant and is known to last over 50 years in professionally performed metal roofing applications. It is more expensive than steel, but it is very light weight and very popular among the homeowners.

Copper is perhaps the oldest type of metal roofing material that has been in use for a very long time and is known to last for over 70 years. In fact it is said that copper is getting better as it ages. Copper is highly expensive and that's why it is usually used in limited applications such as the the facial coverings of the windows. There are however complete copper roof systems that are available to be installed over residential properties. They come with a great premium, but there are people who want the best and are willing to pay for it.

Finally, keep in mind that even the best metal roofing system is worthless if it is not installed professionally, so make sure that you do your homework and carefully investigate the prospective metal roofing contractors in your area.

Good luck

Aleksandr Biyevetskiy has been involved with metal roofing installations for many years, and now co owns a Massachusetts based metal roofing company http://www.newenglandmetalroof.com Quality of metal roof installation, and customer satisfaction are the main objectives of new england metal roof. Our website features helpful information about metal roofing, roof prices, and how to guides on roof estimating and measuring.