Alternative Mass Loaded Vinyl Installations for Soundproofing

There is more than one method for installing mass loaded vinyl to obtain maximum effect. The standard of the industry is to install the MLV directly to the stud or joist framing using an industrial stapler or heavy-duty roofing nails that have the large plastic heads. This method is known as the membrane or septum method. The MLV works well when placed on a wall or ceiling in a membrane fashion, however it can also be sandwiched between 2 layers of drywall or other type of wallboard. The jury is still out on what thicknesses of drywall is best. For better frequency diffusion, it is best to use a layer of 5/8? drywall then the MLV as a septum (a sandwich) and then add a layer of ?? drywall or Homasote. The dissimilar materials do help in the soundproofing effort especially when we are looking to get every STC point we can get with as little effort as possible.

There is not a lot of information on the Web in regards to alternate methods of mass loaded vinyl installation, hopefully we will be able to explore this here. If you are constructing walls using the staggered stud method, it would be beneficial to actually weave the vinyl in an out of the staggered stud assembly itself. The above picture gives you a rough idea of how this would look. The key to weaving MLV (or any barrier material) is to seal the vinyl as best as possible. In the case of a horizontal weave (most common weave) it is best to overlap the seams by at least 1? and seal that overlap with acoustical caulking as well as a quality seam tape. The weaving of MLV also aids in the defusing of sound waves. This works much like the dissimilar materials except ?turbo charges it?.

You can also use the weave on a standard stud wall provided there is no drywall installed on either side of the studs. (just open studs) This weaving method can be foiled by stud cross members, so it is best to have only vertically installed studs if you are planning to do the weave. If you weave the MLV on a normally studded wall, there may be problems with the drywall sitting level on the studs. If your studs are 16? on center, then every other stud will have 1/8? of increased width compared to the studs that don?t have the MLV weaved a top of them. To keep the drywall even on both sides, a sound isolation tape can be adhered to every other stud that that is not covered with the weaved MLV this will make all of the stud surfaces flat and even and the drywall will rest evenly on the studs.

From the feedback of our contractors in the field, we have discovered that the more a wood structure is dampened, the better the soundproofing will be in a wall or ceiling assembly. This is especially true for impact noise from above. There are many ways to dampen a wood frame assembly and some are more effective than others. Some contractors have used blown in cellulose in order to dampen the joist or stud structures, but cellulose has no mass and though it will help to a degree, it is much less effective than using blown in closed cell foam, or my favorite (which requires some ceiling demo) is to line the cavity areas between studs and joists with a closed cell vinyl nitrile foam mat (America Mat is a great choice) for maximum dampening. The foam mat would be glued to the studs and the wallboard in the stud cavities (provided you have drywall on one side of the wall only). This insures that the wooden structure is completely dampened and if sealed properly will offer extra soundproofing as a result of sealing those cavities. Sealed dead air space is God?s natural soundproofing method, as I like to call it. I am sure you have read many of the analogies regarding sealed dead air. If you were able to seal the dead air space and actually create a vacuum in that space, you?d be amazed at the amount of sound transmission that would be blocked.

I hope this little narrative helps you especially if you are doing new construction for a home theater, or music sound studio in your home. Thanks for reading and learning together. This is Dr. Bob?..Out!!!!!!

Dr. Bob is the Senior Technical Advisor at Soundproofing America Inc, the leading authority in Soundproofing and Acoustical treatment technology.

Dr. Bob O.
Soundproofing America, Inc.
Senior Technical Director
Soundproofing Expert to The New York Times, The San Francisco Herald Examiner, The San Diego Union Tribune, and the Charlotte Observer
Ph (877) 530-0139 Toll free Fax (347) 721-9079
E-mail: Dr.bob@soundproofingamerica.com
http://www.soundproofingamerica.com

Baby Proofing Your Home

A baby is a both a joy and a responsibility. Taking precautions help to ensure that your new addition is safe can ease some parenting burdens.

Before bringing your baby home, slowly investigate each room. Get down on the floor. Lay down if possible. See your home from a baby's point of view. Look for hazards and correct them. Some potential dangers to watch for include:

Anything dangling. Electric cords, tablecloths, curtains and cords from window blinds should be secured well out of baby's reach. Your infant could strangle, be electrocuted or pull something heavy or hot on top of themselves.

Move cleaning supplies, medications and any other poisons up and out of reach. One of the ways in which a child learns is through taste and you certainly don't want them sampling anything toxic! Consider too, moving all houseplants out of the way as these can prove poisonous as well.

Check the crib. Bars should be no more than 2 3/8 inches apart. Make sure the mattress fits tightly and resist placing large stuffed toys inside.

Clear tables, floors and cabinet tops of anything small that a baby could swallow. Make sure that any wobbly furniture is repaired or removed.

Once baby is home, there are a few more precautions to take. Do not smoke, use matches or drink hot beverages while holding your baby. Any of these can easily burn your child or become a fire hazard.

Avoid foods, especially with children less than one year of age, that can become lodged in their throat. Popcorn, grapes, raisins, nuts, hard candy and small pieces of hot dog should be avoided. Never let a child suck on any type of food while lying on their back!

These are basic, common sense precautions every parent should take to keep baby healthy and happy.

Nikola lives and writes in Oklahoma. She enjoys scrapbooking, reading and volunteering. This article has been submitted in affiliation with http://www.BabyNameVote.Com/ which is a site for Baby Names.

Extend the Life of Your Roofing--Gutter Care in 3 Easy Steps

Replacing your roof is expensive. Extend the life of your roofing with gutter care. The gutters and downspouts of your roof are the primary protection against water damage to your roof and your home. Allowing leaves and debris to accumulate in the gutters not only renders them less effective but can damage your gutters and ultimately your roofing.

Gutter maintenance can be a dirty job, but somebody's got to do it--really. Regular gutter maintenance is vital for keeping your gutters clean and working properly. Keep your house and roofing safe and dry through regular roofing and gutter care with these three easy steps.

Clean Out

Gutters need to be cleaned every year to remove leaves and other debris from the system. Use a sturdy ladder on steady footing to help you in your roofing and gutter care. Many ladders feature spans designed specifically to place you at the perfect distance from your gutters without resting or leaning against them, which could damage your gutters.

If you have gutter covers or screens and leaves have made their way underneath them, remove the covers before you begin to clean out your gutters to ensure that they're thoroughly clean. Carefully remove leaves, sticks and all other debris from your gutters and roof. This wet mulch may have already begun to decompose in your gutters. You can bag the debris as yard waste or trash or add it to your compost pile. Stubborn debris may require a tool, like a barbeque brush, to remove.

Rinse Out

Once the gutters are debris-free, use a garden hose to rinse them. This method is also useful in finding leaks or detecting clogged downspouts. A high pressure stream of water may be able to remove clogs, but it may also take shaking the downspout or even using a broomstick or dowel to remove it.

Once your gutters a fully clean, protect them with gutter screens. Screens keep debris from building up in gutters and drains, but leaves can still accumulate on top of the screens. Even with gutter screens, regular roofing and gutter care is still necessary. The leaves that accumulate on your roof can create weak spots and introduce rotting and leaking to your roof, both of which can require expensive repairs.

Check Out

Once your gutters are clean and protected, inspect downspouts, pipes, and gutters for rust, warping, damage and other problems. Check all connections along the pipes as well as the connections to the house to ensure that they are sturdy. Replace damaged connections or pipe sections to keep your gutters working optimally. You can patch holes in your gutters with roofing cement. A metal patch is necessary for larger holes, but these fixes can save you the expense of replacing an entire section of gutter--or your roof.

As part of your annual roofing and gutter check up, you should inspect the overall condition of the roof as well. You can do this by using a ladder to climb on the roof or using an attic ladder to get up close and personal from the inside of the roof.

Inspecting your roof from the inside out is probably a better alternative to keep you from falling through any extremely weak spots on your roof. Always exercise caution on roofs and in attics.

Look for discoloration, dampness, and other warning signs of water damage. If you do detect signs of water damage, immediately check the wood, insulation or other surrounding materials for signs of mold. Mold can be removed with chemicals, but extensive mold problems should always be handled by a professional to make sure that all the mold is contained.

Termites and other pests might also be a problem. Check for potential rodent and bird nests while you're inspecting your roof.

With these useful tips, you'll be able to extend the life of your roofing through gutter care and maintenance. Remember to always exercise caution when working on a ladder and use other safety measures to keep yourself out of harm's way as you protect your house from water damage.

Jordan McCollum is a content writer for 10x Marketing, an Internet marketing firm. To learn more about the best tools for roofing/gutter care, visit LittleGiantSales.com today

Learn How to Install Metal Roofing

Learning how to install metal roofing may be your first step toward safeguarding your home from the elements in the most efficient and economical way. Although the initial monetary outlay may seem high, if you remain in the home for a period of years, the cost justifies itself. Experts agree that a home with a metal roofing system withstands greater wear and tear than other types of roofing.

Several metal shingle suppliers online offer advice and instructions on how to install metal roofing. One of these, Permanent Roofing Systems (www.PermanentRoofing.com) offers a downloadable PDF file to those interesting in learning how to install metal roofing purchased from their company.

The patent-pending, do-it-yourself metal roofing offered by Permanent Roofing features a four-way interlocking system of aluminum shingles. The user-friendly design of the Permanent Roofing system gives people who are trying to learn how to install metal roofing a leg up with its innovative system.

Because so many types of metal roofing exist, before you decide on learning how to install metal roofing, you might want to check some of these out. Some of the most popular metal roofing systems being used today include Gerard, Decrabond, Met-Tile, Prestige, and Zappone. Prices for metal roofing with these systems vary anywhere from $1.25 to $4.50 per square foot in material ranging from aluminum to copper.

If you feel better about learning how to install metal roofing from reading a book, check out Roofing the Right Way by Steven Bolt. You can find Bolt's book, which includes a fairly comprehensive section on metal roofing, at Amazon.com for around $20, not including shipping.

Learning how to install metal roofing doesn't have to be a daunting task when done methodically. Reading Permanent Roofing Systems' instructions, educating yourself on the various types of metal roofing systems, and acquiring Steven Bolt's book should all propel you forward in your quest of how to install metal roofing.

So don't put off your quest on how to install metal roofing any longer! There's no time like the present to get started on the roof you've dreamed about forever. And learning how to install metal roofing may lead to learning something else. Who knows? You could start a habit you'll never want to break!

Carlo Morelli writes for OnlineTips.Org, where you can read tips on attic radiant barriers, metal roofing and other home/garden topics

Make Soundproofing A Part Of Today?s Home Improvement

Want a simple behind the scenes way to increase the comfort and value of your home? Soundproofing may sound like something only professional recording artists need, but you will be surprised at how much you will enjoy the added quiet that soundproofing supplies to your home environment.

There are many areas where soundproofing can be added in order to make for a quieter space. Sometimes it the outside disturbances of traffic or barking dogs that you would like to block out. Other times, you may want to keep noises from one room inside your home from seeping into other areas. Depending on the way you want to manage and control sound, there is a soundproofing technique that will meet your needs.

Keeping Noise Out

One of the most effective ways to keep street noise from entering your home is to soundproof your windows. Normal windows are given a sound blocking rating on a numerical scale. The percentage of noise that soundproof windows can block out increases substantially with these special windows.

The best part of the whole process is that it is easy. When you add soundproof windows to your home it will look just the same as the old windows. In fact, the old windows remain in place and the extra glass barrier is added to them. Windows will still open and close in the same manner too, but the panel of glass and the air pocket created by the double pane greatly reduces noise.

Sound proof windows differ from just plain double pane storm windows. The greatest effect is in the amount of space between the two panels of glass. It is just the right amount to trap unwanted noise, and it has the added benefit of staying clean inside because of the air block seal.

Keeping Sound In

Another area where soundproofing may be wanted is in a home theatre. If you want to keep the sound from the stereo system from getting distorted or disturbing others around the house, then there are sound proof panels that can be added to the room. These panels are usually made of foam, resembling an egg crate, but other materials are being made and tested every day. These look more like decorative panelling, yet offer the same noise control.

Ceilings and floors can help prevent the escape of noise between rooms. By adding insulation, similar to that which keeps the cold out in the winter and the heat in, you can reduce noise in and out of the room.

Soundproofing - Doing It Yourself

If you are good the DYI projects, then soundproof is one you can tackle. It is best to leave the windows to the professional installers, but during any renovation of your house, you should consider sound proofing as important a decoration as the carpet or wallpaper. When you need to repair drywall for example, consider adding the insulation that will reduce noise. After all, no one wants to be enjoying lunch in the kitchen or on the patio and have to listen to a teen?s stereo from the bedroom! Soundproofing may not be something you would have missed until you have it once. Then you will be thinking about it anytime a noise gets in the way of your peace and quiet.

Ken Morris releases many news and information to the internet site http://www.soundproofing-tips.com. Within his publication he is working on topics like floor sound insulation ( http://www.soundproofing-tips.com/floor-sound-insulation.html ) and provides information on acoustical foam.

Basic Methods of Foundation Waterproofing

It is absolutely necessary to waterproof the foundation of your home. Foundation waterproofing is a critical step in maintaining your home's value and an important measure for preventing very serious damage. Usually done by professionals, foundation waterproofing is generally not recommended as a do-it-yourself project. Your home is likely your biggest investment, and foundation waterproofing is imperative in order to protect that investment. Ideally, foundation waterproofing takes place as the home is being built, but years of settling and water leakage or negligence on the part of the contractors often leaves the home's foundation unprotected.

One short-term waterproofing method is the use of black tar for foundation waterproofing, but this is certainly not recommended. Keep in mind that this is a very short-lasting method that will dry out, crack and let water seep back in within five to eight years. In professional terms, tar is used as a damp-proofing method rather than a waterproofing method. If you do choose to attempt do-it-yourself foundation waterproofing, it is recommended that you use rubberized liquid membrane, which is basically the same material that automobile tires are made of. The liquid membrane is quick drying, inexpensive and generally easy to apply. It can be applied with a roller, sprayer or trowel. Be aware that by using this method, you run the risk of inconsistently applying the membrane. Pay careful attention to ensure it is properly applied.

Again, foundation waterproofing is generally left to the professionals. There are materials and methods available for people who wish to do it themselves, but it's a good idea to do some research first as it is important to get the job done right.

Waterproofing Info provides detailed information on waterproofing systems, as well as waterproofing contractors and consultants. Waterproofing Info is affiliated with Business Plans By Growthink.

Draught Proofing Your Home

This article takes a look at a number of ways of preventing or reducing draughts in your home. There are areas we look at are doors, windows and double-glazing, garage doors and finally some of the furnishings you could use to prevent draughts. Draughts are obviously caused by the cold air from outside being drawn into the house and replacing warmer air. The knock on effect of preventing draughts is a reduction in your heating bill and a warmer home. Draughts can be identified in a number of ways such as identifying obvious gaps, feeling for moving air around doors and windows and looking out for moving curtains.

As we mentioned earlier double-glazing can reduce draughts. It can also reduce heat loss, noise pollution and condensation, and all of these benefits reinforce the decision to get double-glazing. Reducing heat loss will obviously reduce heating bills and by making heating your property much more efficient. This in turn means you are making a contribution to reducing pollution and so benefiting the environment. The reduction in noise will give you a greater sense of privacy, particular if you live alongside a busy road, plus condensation can damage soft furnishings and create a damp atmosphere. By buying sealed units which fit perfecting onto their frame you are ensuring a draught free environment.

The most common area for draughts is a door. Not only is there often a gap between the door and its frame, but doors can also have cat flaps, keyholes and letterboxes. Modern doors and their frames have been built with excluding draughts in mind, but older doors are much vulnerable. You should look at draught proofing any holes or gaps around the door or indeed in the door such as cat flaps. An alternative is a draught excluder, which can be stretched along the bottom of the door where the draughts are more likely to come from.

If you have an integral garage then this is an area, which can let the cold and draughts into your property. You should not only draught proof the internal door to the garage but also the garage door itself. The best style of garage doors for keeping draughts down are the roller and sectional garage doors. These fit snugly onto tracks fitted onto the side of the garage, unlike the up and over garage door or the more traditional side hung door.

So, these are just some of the areas to attack when looking reduce draught and retain the warmth in your home.

Garry John has contributed to several home improvement sites such as garage doors and double glazing.

 

Waterproofing Your Foundation? What Is The Right Choice?

What is foundation waterproofing?

Waterproofing is Protecting your property foundation be it residential or commercial from cracks due to natural processes such as water damage, thermal movement, shrinking, settlement and other causes.

Think of foundation waterproofing as a long term solution for protection of your property.

Did you know that 44% of new homes have leaking basements without 3 years of completion? And the warranty on dry basement on a new home in USA and Canada is only 1 or 2 years?

Think of what can happen if you dont pay attention to properly seal your house foundation.

It not only causes countless damage to your property it also decreases value of your house, costs money to repair, wastes time, not to mention various health and life hazards.

So what is the Solution to this problem?

Waterproof your property the right way as you build it!

There are many products on the market and it is difficult to choose at times, but not all are the same quality.

The easiest, simplest and smartest way is to apply rubberized liquid membrane. Liquid rubber membranes are elastomeric polymerized coatings made from liquid rubber the same quality tough material your car tires are made from.

Advantages: They are easiest to apply, quick to dry, cold applied. You can do it by yourself, by using sprayer, roller or trowel. The liquid cures into an elastic rubber coating on the wall, able to fill up eventual cracks in foundation wall because of its flexibility. They also come with a long warranty and are very cost effective.

If you want the best ones you should aim at the ones which are environmentally friendly, non-toxic, non-flammable, also VOC compliant, offer superior vapor and water barrier protection, and no priming is required before installation.

Disadvantages: Possibility of inconsistency in coverage, but the newest liquid rubber foundation waterproofing membranes will help you to determine the "right" thickness by intensity of color f.e. the Gray Coat All Seasons Formula from Aquasealusa.com blends in with the concrete foundation, so over-spraying is no longer a problem, making it much easier for the applicator to apply.

There are of course other products on the market like sheet membranes, cementitous waterproofing, hot tar or bentonite, but they either dont offer such a long warranty, are labor intensive or low quality, or you have to use company employees/certified technicians who are the only ones allowed to apply their product which will cost extra money.

Basically it comes what your needs are and how much money your are willing to invest to protect your property properly.
Waterproofing-foundation-guaranteed.com

Dagmar Rakos is the site Administrator for Waterproofing-Foundation-guaranteed.com

Highly effective, easy to apply foundation, basement and specialty waterproofing products for ICF and standard construction. For home builders and waterproofing contractors.

Available at http://www.waterproofing-foundation-guaranteed.com.com.Organic Roses in the Flower Garden Part 1Sandra Dinkins-Wilson

Many people believe growing their flowers and vegetables organically is healthier for them and their environment. It is natural that you may wish to grow your roses this way also. Using the pesticides and insecticides that are usually considered to go along with growing roses and keeping them healthy can cause many people have to health problems . Maybe you just don't want those kind of chemicals in your garden and around your children. This article will give some pointers in using more natural methods of growing your roses.

1. First do your homework and find out what type of roses grow well in your area. Buy disease resistant varieties. If you live in an area that has problems with a certain disease, look for a variety that is resistant to it. If you can, purchase organic roses. As they have already been growing with organic methods, this supposes they are "healthier". and not already loaded with chemicals. Thus they have a stronger immune system. Of course, buy roses with no blemishes on them.

2. Roses like full sun. Make sure they are placed so as to get 6 to 8 hours of sunlight a day.

3. Do not crowd your roses together. Ensure that stress is reduced by providing lots of space for air to circulate around the bush. Take growth of the rose bush into account.

4. Plant your roses in good loamy soil. If your soil is not ideal, then amend it with organic material such as from your compost pile. You do have a compost pile, don't you? Roses like well draining soil but they don't want it draining as fast as you might get with sand, so amend your sandy soil. If you have clay soil, an alternative requiring a bit of work is to build a raised bed for your roses much like vegetable gardeners use. It should be at least a foot deep but more is better. Fill it with will amended soil.

5. Keep your watering consistent. Don't allow your plants to dry out and suffer stress before watering. Roses can need up to 2 inches of water a week. Water every two to three days. This, of course, depends on your area and the type of weather (how much rainfall) you are getting. Also, be careful not to stress the plant by overwatering and depriving the roots of oxgen.

6. Mulch, mulch, mulch! Mulching can reduce the stress on your rose in several ways. It helps to hold in moisture which can be very good in a hot, dry climate. It helps maintain a more even temperature in the root zone. And mulch can smother weeds that could be competition for your lovely roses. As the mulch decomposes, it adds more nutrients to the soil around your plant. Lastly, it can cut down on some of your work. ;-)

7. Roses are, what could be considered, heavy feeders. They respond well to fertilizer and should be fertilized on a consistent schedule. Most organic fertilizers are slow-acting and may produce less spectacular results of a non-organic fertilizer. Some organic fertilizers to consider are composted manure, fish emulsion, alfalfa meal, blood meal, and cottonseed meal. If you wish to have a truly organic rose garden, you should ensure that your fertilizer is also organic. Of all these the only one you can be sure is truly organic would be your composted manure if you know exactly where it comes from and how the animals are raised. Perhaps you should consider your own animals raised organically. Chicken manure is very high in nitrogen and some localities allow a small backyard flock. Make sure it is composted thoroughly as chicken manure is very "hot" and will burn your plants.

8. Prune your roses in the early spring. To keep your roses healthy, get out the dead wood, damaged wood and anything that starts to look diseased (and don't compost these trimmings). Thin out your plant to keep it from being crowded. Don't allow branches to rub against each other. This will allow air and sunlight to get to the whole plant keeping it healthier.

In part 2 later this week, we will discuss some organic methods of combating specific diseases and pests. http://flowergardenlovers.com.

Corrugated Roofing Materials used for Roofing any Structure

The roof is a very essential element of the house, building or any structure. They provide the shelter and the protection from natures elements and factors such as rain, snow, sleet, as well as sunlight. But basically, the roof is like a wall of the house, a panel if you will; only it is placed and located on top of the house or building. Roofs are basically characterized in two ways, the flat and the sliding. Some combine both. Roofs may be made from different materials, all throughout the history of mankind, different materials have been used as roofing materials and one of the more successful is the corrugated roofing.

Corrugated roofing started out as sheetmetal. They form some sort of waves on the roofing for design as well as for purpose. Nowadays corrugated roofing is made from different materials, such as Stainless Steel, Fiberglass, Aluminum, Coated or Painted Steel. Usually they are treated with special finishes to prevent corrosion. Corrugated roofing materials are easy to use and install. They are relatively affordable than other roofing materials and are a long lasting solutions. Corrugated roofing materials are usually used for the sliding type of roof.

Steel corrugated roofing materials can be quite long lasting. They can be painted with different colors and treated with different solutions to make them even more long-lasting. They are also pretty lightweight and easy to handle. Installation can be done with a minimum number of persons. Whats more they are very affordable. Corrugated roofing materials that uses fiberglass are very translucent which can provide natural lighting to the house or building. They are watertight like other corrugated roofing materials and are very lightweight and durable. Corrugated roofing materials are also more rigid than a flat sheet of a similar type and thickness, this results to a substantial reduction in cost and weight.

The disadvantages in using corrugated roofing materials are that they are very lightweight and can be hard to work with if the weather is extreme. Fiberglass corrugated roofing materials cannot withstand high heat, fiberglass also easily chips while metal and aluminum corrugated roofing materials dent easily and is hard to restore. The temperature plays a major facto with corrugated roofing materials and if they are not installed properly they may detach. Because corrugated roofing materials are usually very thin, they can be very noisy when it rains, snows or other extreme weather conditions. The corrugated roofing materials sheets can also be very heated during hot sunny days and the heat can radiate to the rest of the structure making it very uncomfortable. To eradicate this problem, a false ceiling must be placed, the gap in between should be well ventilated so that the hot air will be dispensed through that manner. Utilizing light colored corrugated roofing materials or painting it with light colored paints if possible will also decrease this problem.

When installing corrugated roofing materials, there is some basic building materials needed such as, Filler strips, these are wood shaped to fit the contours of the panels, special nails for corrugated roofing materials, plastic washers, you will also need a drill and drill bits, a saw might also be needed for some cutting. Corrugated roofing materials are sold in panels with different sizes, before purchasing, it is best to determine which size and how many panels will be needed so that cutting will not be necessitated thus avoiding waste and additional costs. With corrugated roofing materials you get high=quality roofing materials that is very affordable, easy to handle and install and can be designed to compliment any house and design.

Online entrepreneur Sara Jenkins, is dedicated to helping others and their needs to succeed in life by offering free payroll tips everyday. To learn more about her free roofing tips, and to sign up for her FREE Roofing articles and FREE bonus how-to books and resources, visit www.RoofingUp.com.

Roofing Nail Guns

Roofing nail guns are some of the more extreme of DIY tools and are often reserved only for the professional contractor. If you are putting together a small chest of draws or a book case you only really need the effective and affordable services of a standard hammer but if you are attaching a roof to a 2 story house it could take you weeks to put a few nails in. Roofing nail guns take the burden out of this chore and make your job much quicker and much simpler so whether you are an amateur or a professional you should bear in mind that you won’t get far without using roofing nail guns.

Why bother with roofing nail guns?

Roofing nail guns fire nails into wood or any other material they are specifically designed for meaning it takes a fraction of a second to ‘hammer’ in one nail. This takes away the hard work and the time normally involved in hammering large mounts of nails. While they are extremely useful they can also be quite dangerous if not treated properly.

Spring loaded roofing nail guns.

Spring loaded roofing nail guns are the simplest and most affordable nail guns that you can buy. They are really quite simple in their ingenuity and they use some very high tensile springs to fire the nails out of the chamber and into the wood. Crude maybe, but highly effective definitely! These roofing nail guns do still use a little electric power to pull back the springs to such an extent that means they will effectively fire with enough pace to lodge into the piece of wood.

Solenoid roofing nail guns.

Solenoid roofing nail guns are powered using electromagnetic polarization. When you pull the trigger the polarization in the gun reverses repelling the nail away from the mechanism and into the wood. This is a highly useful technique and is used in many different types of machinery and tools so are proven to work over long periods of time. There are very few pieces that are likely to break and leave you with powerless roofing nail guns, this durability is a distinct advantage over the relatively fast wearing spring loaded roofing nail guns.

Pneumatic roofing nail guns.

The most popular and widely used type of roofing nail guns are compressed or pneumatic nail guns. By compressing air in a standard air compressor it can gather huge amounts of power. In pneumatic roofing hammer drills the pressure is used to initially hold the hammer in place so that the nail is not fired but when you pull the trigger this opens a passageway that lets the compressed air out and dispels the nail at great speed. These are the most popular form of roofing nail guns because they only need an air compressor to run. Air compressors can be powered through a number of different means and you do not need to plug pneumatic roofing nail guns into the mains power. This cuts down and cost and makes it reliable and much more convenient, not to mention safe when it starts to drizzle.

As Northern Virginia Roofing Contractors, Roofer911.com takes great pride in maintaining customer satisfaction for all types of new roof installation and roof repair work for residential and commercial roofing accounts. Does your website need more exposure to the search engines? Add Your Site Today to our free directory.

Thatch Roofing Shingles

Traditionally speaking, thatch roofs were the ultimate roofing choice for making one's home look cozy, ethnic, or even tropical. The making of thatch roofs hails back to prehistoric times when early men had started building their huts and covered them with thatched roofs typically made out of straw, reed, or grass.

Over the years of course, original thatch roofs have lost out in a big way to faux or synthetic thatch shingles that have flooded the market. The idea is to experience the joys of a traditional thatch roofs without the disadvantages that one might have faced while using it in its original form.

Going by recent trends, there are a number of synthetic thatch shingles available, made mostly out polythene fibers that come with a strong U.V. resistant guarantee. These fibers are carefully blended with a thin but tough waterproofing membrane and can protect the owner from the elements quite effectively. Manufacturers provide warranties against color fastness, decay, and rot.

The polythene fibers used to make the shingles are actually tiny plastic particles and a polyurethane-binding strip is used to bond these particles and form a shingle. These can be easily used on any existing roof for a very low installation cost. Although expert professional advice is always welcome, owners can install these thatch shingles themselves without much trouble.

These shingles come in shades of yellow and gold to give a natural straw-look. Brownish-green shades are also available that give the shingle a palm-appearance and reminds one of tropical islands.

Outside the United States, thatch shingles have become very popular in South Africa. Thatch shingles like the ones that have a bamboo or eucalyptus lath finish are becoming increasingly popular.

These synthetic shingles can be installed not only on high-slope roofs but also on low-slope ones. With life expectancy of a minimum of fifty years, these shingles create a perfect blend of nostalgia and modernity.

Shingles provides detailed information about shingles, cedar shingles, fiberglass shingles and more. Shingles is affiliated with Home Foundation Repair.

Repairing Rolled Roofing

Working on your roof, including repairing rolled roofing, can be a dangerous job. Before getting started, make sure that your ladder is strong and secured. Remember to avoid working on the roof if it is raining or wet, as this can be extremely dangerous. With the presence of water, the roof becomes very slick and increases the likelihood of a serious fall. When repairing rolled roofing, always try to choose a day with nice weather in the forecast. If you have a fear of heights or just do not wish to do the work yourself, call a professional contractor to ensure that the job is done correctly. If you decide to take on the job yourself, here are a few tips to help guide you through the process:

Material List

1. Broom or brush to sweep away debris

2. Rolled roof material to match that of your current roof

3. Utility knife to cut the roofing material

4. Roofing cement

5. Roofing nails

Remove All Debris.

Now that you’re ready to begin, start with a broom or brush and remove any loose dirt, leaves or other debris from the damage in the roofing material. Once it’s been swept away, carefully remove the damaged material making sure that neighboring pieces are not damaged in the process.

Replacing The Damaged Material.

When repairing rolled roofing, once the damaged piece is removed, cut a piece of roofing material to match the size of the one that was removed and prepare to replace it with the new one. Using roofing cement, secure the new piece in place and complete the process with roofing nails. Be sure to clean your workspace and not leave any of the old material or supplies lying around.

Calling In The Professionals.

While some relatively minor repair projects can be done by the homeowner, it’s often recommended to call a professional roofing contractor. When repairing rolled roofing, or any other home project, be sure that you can complete the task before taking on the job yourself. If you attempt to repair something that you aren’t familiar with, you may end up with further damage if the repairs aren’t done correctly. If you have any doubts, call a reputable contractor in your area for a price quote and scheduling.

As Northern Virginia Roofing Contractors, Roofer911.com takes great pride in maintaining customer satisfaction for all types of new roof installation and roof repair work for residential and commercial roofing accounts. Does your website need more exposure to the search engines? Add Your Site Today to our free directory.

FAQ About Roofing

Sun, wind, rain and hail have all had a chance to damage your roof and the time has come to think about re-roofing. How do you know if your roof is ready for re-roofing? Who will give you trustworthy advice? Where do you start? How many bids should you get? What part should you play during the construction process? What is fair to expect of a contractor? What are the permit and licensing laws in the State of Your State?

If these are questions you are asking yourself, you have come to the right place! The Roofing Contractors Association of Your State (RCAT) is an organization of professional roofing contractors dedicated to the practice, and teaching, of the skills needed to protect your building from the elements. We offer this guide as a sincere effort to help the customer and contractor arrive at a happy conclusion to a successful effort.

Are you ready for a re-roof?

After a hail storm has hit your area, it may or may not be obvious that you need a new roof. While some hail may produce leaks that appear immediately, quite often hail may only fracture your shingles, which leads to premature roof failure. An inspection by a professional roofing contractor can answer this question. If you have a roof that is fifteen years old or older and it starts to show signs of deterioration, or produces leaks, it is time to call your roofing professional for an inspection and consultation.

Choose a member of the

Roofing Contractors Association of Your State

The State of Your State has no licensing requirement in place for roofing contractors at this time (2000 - 2001). RCAT is a twenty-five year old organization that was founded with the expressed purpose of bettering the roofing profession through education and the pursuit of a quality product. By choosing a member of RCAT to be involved with your project, you are assured that you have a contractor who has had a successful track record in this field. To become a member, a contractor has to produce qualified references and be known to his competitors in the roofing community. What is a Certified Roofing Contractor?

In the absence of licensing laws in Your State, RCAT has developed a comprehensive testing program. These tests are strictly monitored and require thorough knowledge of commercial roofing, residential roofing, and business and contract law. Certified contractors are leaders in their field who are bringing a proven professionalism to your roofing or re-roofing project.

Certifications are:
CCRC
Certified Commercial Roofing Contractor
CC-RRC
Certified Commercial and Residential Roofing Contractor
CRRC
Certified Residential Roofing Contractor
These certifications are noted in our membership listings.
Getting the estimate

Choosing the right contractor is the most important step. Be sure that you obtain at least three written estimates. These estimates should all be based on the same type and quality of materials. Time needed to complete the project should also be included. Be sure to inquire how work will proceed and how trash will be handled so that you will know what to expect as the job proceeds. Understand the differences in your bids if there are variations. Donft automatically choose the lowest estimate!

Ask for a list of successfully completed projects in your area. Check references and inquire about quality of work performed. If possible, go look at the contractorfs work. Check with the BBB to see if any complaints are unresolved. Ask for written evidence of coverage from the contractorfs insurance carrier. Ask about warranties.

The contract

The agreement can be as simple as a signed proposal. It should have the contractorfs name, address, and phone number. All areas of work and materials to be used should be described. If it is verbally promised, it should be written down. On large jobs where monthly draws will be necessary, a standard AIA contract form, available at most business supply stores, could be a consideration. Whatever document you decide to use, your contractor should supply two copies that you both sign, one of which you should keep. Keep any receipts of money paid. Pay by check. With a regular sized house, it is considered usual for you to pay one third to one half of the cost of a job at the time that all materials are delivered onto your property. The balance due is then usually paid at the time of successful completion. This varies in different areas and with different contractors but should be worked out and written in your agreement. If you will be paying for this roofing in conjunction with a building loan or insurance claim, or if for any other reason there will be a deferred payment, this should be written down and agreed to by both parties. Warranties and guarantees of workmanship must be a written part of the contract. Obtaining a roofing permit

In many communities, a roofing permit is required. Check with your contractor or the permits department at your city hall to obtain information. Be sure it is understood who will obtain and post this permit.

During the job

You have followed your instincts and from the information presented, you have made your choice. You have his handshake, a written and signed proposal, a copy of his insurance, and you have gone over the scope of the work. You have done well; now let that roofer go to work. With proper pre-job paperwork and planning, you have helped to ensure that this upgrading of your buildingfs element protection is effective and long-lasting. It is not unreasonable to expect a daily report from your contractor, but the best thing to do now is have confidence in your choice. If your contractor is a member of the Roofing Contractors Association of Your State, he is pledged to your satisfaction.

Being aware that most roofing applications cannot be worked on during rainy weather. You should expect that the number of working days need be increased by the number of rain days experienced. As long as weather is factored in, you should be able to monitor the work from a bit of a distance. If things are on track, let them work. If you are unsure of any part of the progress it is best to contact the person who contracted with you. Donft try to run the crew; let their boss do that.

DO NOT use a contractorfs ladder to go up onto the roof. Good safety practice and insurance regulations prohibit it.

Final payment

At the time of final payment, all work should be done, grounds cleaned, warranties dated and signed. Get a receipt for all payments. If you keep these receipts and warranties, they can come in handy in the case of severe weather damage in the future.

If you are pleased with your contractorfs work, let him know that this is a job well done. These folks work mighty hard for you out in the hot Your State sun, they can use an "Attaboy."

Remember to...

Verify the name, address, telephone number, and references of your roofing contractor. Ask if he is a member of the Roofing Contractors Association of Your State. Make sure that he is insured.

Obtain at least three bids, and get a feel for the work and materials offered. Check zoning and permit laws in your community.

Make sure that all agreements are written and signed and you have a copy. Don sign any agreement that you don fully understand or agree with.

Once you have selected a contractor, give him the access he needs to get the job done. Final payment should be made when all work is complete. Donft pay cash in advance to a salesperson or contractor.

BEWARE of...
Contractor whose references are all out of state.
Contractor who wants money before materials are on site.
Contractor who is not an established member of the community.

Flat Roofing Materials

It’s a fact that your roof is one of the most important parts of your house and is the one thing that provides the building structure, the building occupants and the building contents with protection from the elements. Many roofs are in a state of disrepair but homeowners ignore this until the roof gets worse or until the weather gets worse. With regular maintenance and the early identification and fixing of any problems you can usually avoid the big problems that have equally big price tags attached to them. Regular maintenance in this way will also help extend the life of your roof.

Selecting flat roofing materials.

Flat roofs have extra difficulties associated with them. Because they do not slope rainwater does not automatically run down the roof and drain off. It is absolutely vital that flat roofing materials are as water resistant and water tight as possible to prevent serious damage to the roof itself and to the rest of the building and it’s contents. New types of flat roofing material are being used and while these offer more in the way of protection they are also more expensive as a general rule. There are still three main types of flat roofing materials that are used on a regular basis on new and older houses.

Built up flat roofing materials.

Built up roofing is basically just that. Built up roofing consists of laying down several layers of tar and water resistant materials and then covered with gravel. This is quite an old technique but the introduction of new waterproof materials has seen the strength and durability of this technique increase. The gravel acts as a good fire resistant layer and can be made to look very attractive. It is usually the cheapest of the flat roofing materials available, however, it is very heavy and may require strengthening of the joists. It is also impractical to use on residential houses that are being lived in because it smells terribly. The gravel itself can clog gutters and other vital aspects of water drainage.

Modified Bitumen flat roofing.

Modified bitumen is another stalwart in the world of flat roofing materials. Once upon a time it was necessary to use torchdown techniques that involved burning the roll of material onto the roof, however it is now possible to get adhesive varieties, thus cutting out the potential fire hazard that is sometimes associated. The mineral surface that is used to create modified bitumen can be created in light colors, effectively reflecting the heat and sun. This will cut down on your energy bills during the summer months, and it can even be installed by any avid (and competent) do it yourself fanatic.

Rubber membrane.

Rubber membrane is another method of coating your flat roof. As far as flat roofing materials go it is durable and resistant to general wear and tear. Leaks are easy to find and repair, but the cost is really quite high. The standard black rubber does not reflect heat and paying for a lighter membrane will cost you more, however, it is quick to fit and will cause little disruption to your house life during the process.

As Northern Virginia Roofing Contractors, Roofer911.com takes great pride in maintaining customer satisfaction for all types of new roof installation and roof repair work for residential and commercial roofing accounts. Does your website need more exposure to the search engines? Add Your Site Today to our free directory.

DIY Roofing - Is It Advisable?

Whether it’s snow, rain, sleet or hail, our roof endures a lot of exposure and often takes a serious sting from mother nature. Regardless of what home improvements, decorating or repairs you have done or are in the process of doing, nothing matters if you do not have a solid and stable roof over your head. Before you take on a DIY roofing project, bare the following in mind:

You should only attempt a DIY roofing project if you have completed a similar project successfully in the past, have extensive knowledge or training in roofing or plan to hire a contractor to help supervise your progress. When it comes to your roof, you will want to make sure that it is done correctly in order to avoid leaks and other mishaps. Afterall, your roof is the only thing between your family and the sometimes harsh weather elements.

When it comes to a DIY roofing project, you will need to consider what type of roof you want to install. Do you prefer shingles or a metal roof? Many are selecting a metal roof if they live in areas that are prone to strong storms, hurricanes, etc. Shingles are the more attractive option, but are easily damaged and may require frequent repair and/or replacement. Always be sure to keep this in mind when starting out on a DIY roofing project.

When choosing your roofing material, take the time to consider the manufacturer’s warranty and recommendations. For instance, some roofing shingles are fire resistant and some carry a warranty of 40 or more years. In addition, more shingles are being made that are said to withstand high winds. The warranty and type of roofing that you choose will largely depend on the weather patterns in your area.

Some final points to consider before moving forward with a DIY roofing project is whether or not you are afraid of heights, the weather conditions surrounding the necessary repair or replacement and your budget. If at all possible, it’s best to complete roofing projects on a fair weather day. Working in the rain or other inclement weather could result in slippery conditions, either on the roof or a ladder. In addition, a contractor is obviously going to cost a little more financially, but hiring a professional could be the difference in spending a few more dollars now or a lot more later if the roofing project isn’t completed properly. So, is a DIY roofing project advisable? Only if you are absolutely certain that you can, in fact, do it yourself.

As Northern Virginia Roofing Contractors, Roofer911.com takes great pride in maintaining customer satisfaction for all types of new roof installation and roof repair work for residential and commercial roofing accounts. Does your website need more exposure to the search engines? Add Your Site Today to our free directory.

Essentials Of Metal Roofing And Metal Roofing Siding

There are literally many things that comprises of your metal roofing. They can give you a good and lasting protection against weathering. These days, metal roofing is gaining popularity once again.

Most roofing panels have its siding; there are the ones that are installed on the sides of your house. They are essentially almost made from the same materials that you choose for your roofing but there can be other materials used if you prefer other types.

Metal roofing siding is the part where the roof is exposed. They need to be closed to make the roof fuller and protected. If you want to invest on good roofing, the siding will also come in consideration as they are of the same material.

Commonly, only a few types of roofing are available that you might want to choose from. Here are some of their quick features and disadvantages:

1. As with siding components, one of the most common metal roofing materials is steel. They are prone to corrosion and rusting. However, that can be remedied with a nice coating of zinc. Additionally, you can also seal it to preserve its natural look. There is also stainless steel. They are a little expensive but share the same characteristics as plain steel.

2. There is also aluminum. They are often found on other lightweight materials in your home as well. They are light enough to handle and will never rust but a nice treatment will extend its nice looks.

3. Copper is also used for metal roofing. This is the metal for people with quite a lot of budget to spare because they are very expensive. Being the softest roofing material, they can be easily bended to gain more customization options for your metal roof siding needs. This has a nice red appearance but it will soon wear out in a couple of years. Consider buying copper roofing that is already treated to let their nice sheen last longer.

Many stores have them. Usually the steel types are the ones you can easily spot. However, if you really want to customize your roofing, consider looking for them online. It would make your project planning easier as they can delivery it right to your home and you don't even need to go anywhere but your desktop.

For tips on using metal roofing, visit http://www.metalroofing101.com